How To Resolve Canon Printer Error 6C10

 The canon printers contain an internal counter that keeps track of the number of pages that have been printed and how often a clean up has been done and so on. These counters are utilized to determine the amount of waste ink that may be gathered at the base of the printer. When the canon printer believes that the waste ink tank is complete, the printer not printing also gives you an error message Canon Printer Error 6c10. Fix error 6c10 with no issue. The Canon printers incline to determine the degree of the waste container wrongly.

Therefore, you can usually print more, simply by resetting the counter. In this step-by-step article on the way to fix canon printer error 6c10, you'll learn only that. First of all, we'll attempt to clean the foam that collects the waste ink. This should hopefully clarify the mistake. 

Fix Error 6c10 without any problem

Canon printers have the affinity to determine the level of the waste tank wrongly. You can print more usually only by resetting the internal counter. Within this step-by-step article, you can learn how to resolve canon printer error 6c10.

First of all, we ‘re going to try to clean the foam that collects waste ink. Hopefully, this will clear the error.

Step 1: Remove the lid of the printer and allow the cartridge carrier within the printer to center itself. Once the cartridge carrier is positioned, you can see a row of white rollers on the right side behind the carrier.

Step 2: Clean up the plastic. At the end of the rollers, there is a little piece of plastic that is clear and stick out. Take a small piece of soft fabric or a paper towel to clean the ink from the plastic. Make sure you always clean the ink pad after cleaning the plastic.

Step 3: Clean out the foam pad. From a plastic piece to the end, you’ll find a small square object that looks like a foam pad. It is where the printer collects excess ink. Use a clean towel and press it into the foam pad. Keep the pad clean until the paper towel does not absorb any more ink from the pad.

Step 4: Restart your printer. After cleaning it all, position it back in its original place and plug the printer in again. This is supposed to solve your issue. If not, we ‘re going to need to restart the ink absorber counter.

To reset the ink absorber counter, follow the below steps: –

• Step 1: Turn off your printer.

• Step 2: Press and hold down the Resume button.

• Step 3: Then, press and hold the Power button simultaneously. This is going to make the green LED light up.

• Step 4: Hold the power button, release the resume button.

• Step 5: Click the resume button twice and release the two buttons together.

• Step 6: Click the Resume button four times and push the Power button immediately.

The above sequence would reset the counter on the printer to the tin absorber. After this phase is completed, unplug, and plug the system again.
If the foam collector has been cleaned and the tin absorber counter reset, the answer to your question is successfully how to repair canon printer error 6c10. If not, you must contact the customer service team to solve your issue.

Source Url:  https://ko-fi.com/post/How-To-Resolve-Canon-Printer-Error-6C10-T6T44B0KA